Bedroom: 240 x 210 cm | Stand-up living room: 5 sqm with basin groundsheet
Easy assembly / dismantling
Simple pitching thanks to coloured markers on the poles
Flysheet above the living area to reduce condensation
UPF 30 fabric: lets in daylight and filters out some UV rays
Water column (Schmerber):
Flysheet >2000 mm rating
Groundsheet >2400 mm rating
Withstands force 6 winds - around 50 km/h | Wind tunnel test
Rectangular cover | 60 x 24 x 24 cm | 35 litres | 10.2 kg
Living Room and Bedroom
5 sqm living area with an inner tent height of 1.90 m.
This tent is fitted with a fold-away basin-shaped groundsheet at the entrance in case of rain and a transparent shuttered window.
Each bedroom in this tent is intended to accommodate a maximum of four 60 cm wide mattresses. It can also accommodate a couple looking for a very large bedroom.
Pitching and dismantling
There are three poles to insert into their corresponding sleeves. There are colour codes to help you.
We recommend that 2 people pitch the tent.
The flysheet fabric has UPF 30 sun protection.
Caution: be careful, as a large amount of UV rays can get in through a simple open door.
The ventilated flysheet on the living area airs the room and reduces condensation inside your tent. High ventilation hatches are also provided at the front and back of the tent, along with high mosquito nets on the door and at the back of the bedroom.
We test all our tents in a wind tunnel on a turntable. The aim is to expose each side of our tent to the same wind intensity.
Properly pitched, with the guy ropes deployed, this tent remains habitable in wind speed 6, measured at 50 km/h.
Waterproof and taped seams
We test our tents to validate their waterproofing. The first test is done in the laboratory, 3 hours under 200 litres of water per hour per sqm, the equivalent of 200 mm tropical rain per hour. The second test is done in the field under real-life conditions by our teams. This tent is fitted with a polyurethane-coated polyester flysheet measuring 2,000 mm. It also has seams that have been waterproofed with heat-sealed strips, and a 140 g/sqm polyethylene groundsheet.
As designers and users who love nature, we care about our products. That's why all our tents are designed to be repairable. Spare parts and pole repairs are available at the workshop of your Decathlon store or on our website.
Poles and tent pegs
Poles - All our poles are made from fibreglass and undergo double quality checks. This guarantees some of the best resistance against breakage.
Tent pegs - All our pegs are made of steel and have a diameter of 6 mm.
Our camping tents have been designed for occasional outdoor use (4 weeks per year) when camping or in the great outdoors. Continued exposure to UV rays over several weeks can damage the fabric. These products are not classified as “garden furniture” and aren’t designed to be left outdoors permanently.
Tips for storage and maintenance
Drying in a tumble dryer possible. Normal temperature, maximum exhaust air temperature of the drum 80°C.
Maximum wash temperature of 30°C. Very moderate treatment.
Iron at a maximum soleplate temperature of 150°C.
Maximum wash temperature 70°C. Normal treatment.
Ironing at a maximum iron soleplate temperature of 200°C.
We advise that you air-dry your tent outside, including the underside. You can then store it without any risk of odours or mould developing.
Restrictions on use
Not suitable for permanent outdoor exposure.
TESTS AND WARRANTY
Our partner laboratories, as well as our own, contribute to the innovation and development of our Quechua tents.
Extensive analysis and experience allow us to guarantee the technical nature of these products (wind resistance, waterproofing).
To meet your requirements, Quechua tents are tested in the conditions that you may encounter during your nights in camping or in the wilderness.
Our teams, plus a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
This allows us to guarantee a high-quality tent.